Stormwater treatment technologies include the following devices:


Ecol also offers separators for grases and oils of organic origin:


Anti Odour Filters include the following devices:


High efficiency lamella separator ESL

The lamella separators separate light liquids (e.g. oil, petrol) and sand from water, which flows due to gravity, in the rainwater sewage system before allowing it into receiving waterways (sewer, river, lake, sea). The light pollutants are liquids of density a bit less than water (up to 0.95 g/cm3) that either do not occur in natural waters, or occur in insignificant quantities. The impurities are separated from the horizontal flow of the polluted waters through especially constructed lamella sections (shutters) using flotation and sedimentation effects.

separator_esl

  more information separators & data sheets

back to top

High efficiency coalescence separator ESK

Meeting the demand for protection of the especially important receiving waterways and the international demand for high efficiency separators, Ecol developed a new series of high efficiency coalescence separator ESK. By implementing the innovative construction solutions (improving i.e. coalescence effect) characterizes in a very high separation degree of light liquids from the rainwater and/or technological wastewater. 

separator_esk

  more information separators & data sheets

back to top

Grease separator EST

The grease separators EST are used to separate the organic fats/oil from sewage during flotation. These devices are applied in the case of typical sanitary sewages, e.g. restaurants, kitchens, bars.

separator_est

  more information separators & data sheets

back to top

Anti odour submanhole filter EMF

is designed for assembly inside the well, directly under the cover. The filter is available in two sizes – to be employed under Ø600/625 mm and Ø800 mm manhole. Submanhole filters EMF are protected by utility model right no.W.119955.

  • simple assembly under
  • any Ø 600 and Ø 800 manhole type rainfall drainage by water seal
  • easy maitentance due to replaceable filter inserts

back to top

Anti odour integrated vent EZK

provides an innovative solution on the Polish Market by combining both supply and exhaust functions in
1 casing. Integrated filter vents EZK are protected by utility model right no. W.119583.

  • claimed solution combining supply and exhaust functions in one casing
  • available in two sizes, with Ømon110 i Ømon160 mounting holes
  • easy maintenance due to replaceable filter inserts

back to top

Anti odour pipe vent KF

presents a simple solution with filter packaging that is applied in traditional two-vent system (supply/exhaust).

  • efficient, anti odour alternative to traditional vents
  • available in two diameters: Ø110 i Ø160 mm
  • easy maintenance due to replaceable filter inserts

 

back to top

Anti odour vent insert KFW

instantly changes vents into an anti odour filter. The insert is designed for assembly in commonly found pipe vents made of PVC, PE and Ø100, Ø110, Ø150 and Ø160 mm in diameter.

  • to be applied in existing vents
  • available in two diameters: Ø90 i Ø140 mm
  • simple assembly and maintenance

back to top

Catalouge_of_Separators



Catalouge for Separators

Open (pdf, 9,6 MB)
Download (zip, 9,3 MB)

Catalouge_of_Anti_Odour_Filters



Catalouge for Anti Odour Filters

Open (pdf, 1,3 MB)
Download (zip, 1,3 MB)

ESL

ESK

EST

filter_emf

vent_ezk

vent_kf

vent_insert_kfw